Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 77)

Brocade Mobility RFS Controller System Reference Guide 65
53-1003099-01
5
9. Select OK to import the defined RSA key. Select Cancel to revert the screen to its last saved
configuration.
10. To optionally export a RSA key to a remote location, select the Export button from the
Certificate Management > RSA Keys screen.
Export the key to a redundant RADIUS server to import it without generating a second key. If
there’s more than one RADIUS authentication server, export the certificate and don’t generate
a second key unless you want to deploy two root certificates.
FIGURE 14 Certificate Management - Export RSA Key screen
11. Define the following configuration parameters required for the Export of the RSA key.
Key Name Enter the 32 character maximum name assigned to the RSA key.
Key Passphrase Define the key passphrase used by both the controller or service platform and the
server. Select Show
to expose the actual characters used in the passphrase.
Leaving the Show unselected displays the passphrase as a series of asterisks “*”.
URL Provide the complete URL to the location of the key. If needed, select Advanced to
expand the dialog to display network address information to the location of the
target key. The number of additional fields that populate the screen is dependent
on the selected protocol.
Protocol Select the protocol used for exporting the RSA key. Available options include:
tftp
ftp
sftp
http
cf
usb1-4
Port Use the spinner control to set the port. This option is not valid for cf and usb1-4.
Host Provide a text string hostname or numeric IP address of the server used to export
the RSA key. This option is not valid for cf and usb1-4.
Path / File Specify the path to the key. Enter the complete relative path to the key on the
server.