beautypg.com

Allied Telesis AT-S62 User Manual

Page 92

background image

Chapter 5: SNMPv1 and SNMPv2 Community Strings

Section I: Basic Operations

92

Do you want to change Community Status? (Y/N):
[Yes/No] ->

4. Type Y to change the string’s status or N to cancel the change.

5. After making changes, type R until you return to the Main Menu. Then

type S to select Save Configuration Changes.

5 - Set Community Open Status
Use this selection to change a string’s open status. A string with an open
status can be used by any network administrator. A string with a closed
status can only be used from management workstations whose IP
addresses are assigned to the community string. To use the option, do
the following:

1. From the Modify SNMP Community menu, type 5 to select Set

Community Open Status. The following prompt is displayed:

Enter SNMP Community Name:

2. Enter the community string you want to modify. Community strings

are case sensitive. This prompt is displayed:

Enter Open Access Status [Y-Yes, N-No]:

3. Type Y to assign the string an open status or N to assign it a closed

status. This confirmation prompt is displayed:

Do you want to change Open Access Status? (Y/N):
[Yes/No] ->

4. Type Y to change the string’s open status or N to cancel the change.

5. After making changes, type R until you return to the Main Menu. Then

type S to select Save Configuration Changes.