Allied Telesis AT-S62 - Manual (Page 813)

AT-S62 User’s Guide
Section VIII: Web Browser Management 813
Displaying the RADIUS or TACSACS+ Settings
To display the RADIUS or TACACS+ settings on the switch, do the
following:
1. From the Home page, select Monitoring.
The Monitoring System page is displayed with the General tab
selected by default, as shown in Figure 195 on page 590.
2. Select the Server-based Authentication tab.
The Server-based Authentication tab is shown in Figure 299.
Figure 299 Server-Based Authentication Tab (Monitoring)
The upper part of the page displays whether server-based
authentication is enabled or disabled and the authentication
method. The lower part of the page allows you to view either the
settings for the current authentication method.
3. To view the TACACS+ or RADIUS settings, click TACACS+ or RADIUS.
4. Click View.