Allied Telesis AT-S62 - Manual (Page 699)

AT-S62 User’s Guide
Section VIII: Web Browser Management 699
v2c
Select this value to associate the Group Name with the SNMPv2c
protocol.
v3
Select this value to associate the Group Name with the SNMPv3
protocol.
10. In the Security Level field, enter a security level.
Select one of the following security levels:
No Authentication/Privacy
This option represents neither an authentication nor privacy
protocol. Select this security level if you do not want to
authenticate users and you do not want to encrypt messages
using a privacy protocol. This option provides the least security.
Note
If you have selected SNMPv1 or SNMPv2c,
NoAuthenticationNoPrivacy is the only security level you can select.
Authentication
This option permits an authentication protocol, but not a privacy
protocol. Select this security level if you want to authenticate
SNMP users, but you do not want to encrypt messages using a
privacy protocol.You can select this value if you configured the
Security Model parameter with the SNMPv3 protocol.
Privacy
This option represents authentication and the privacy protocol.
Select this security level to allow authentication and encryption.
This level provides the greatest level of security. You can select
this value if you configured the Security Model parameter with
the SNMPv3 protocol.
Note
The Context Match field is a read only field. The Context Match field
is always set to Exact.
11. In the Storage Type field, select one of the following storage types for
this table entry:
Volatile
Select this storage type if you do not want the ability to save an
entry in the Access Table to the configuration file. After making
changes to an Access Table entry with a Volatile storage type,
Save Changes does not appear on the General Tab.