Allied Telesis AT-S62 - Manual (Page 231)

AT-S62 User’s Guide
Section III: SNMPv3 Operations 231
SNMPv3 SecurityToGroup Table
The Configure SNMPv3 SecurityToGroup Table Menu allows you to
associate a User Name with a security group called a Group Name. The
User Name is previously configured with the Configure SNMPv3 User
Table Menu. The security group is previously configured with the
Configure SNMPv3 Access Table Menu. Lastly, you can configure a
storage type for this table entry which allows you to save the entry to
flash memory.
SNMPv3 Notify Table
The Configure SNMPv3 Notify Table Menu allows you to define the type
of message that is sent from the switch (or non-authoritative entity) to
the authoritative entity. You have the option of defining the message
type as either an Inform or a Trap message. When a switch sends an
Inform message, it expects a response from the authoritative entity. In
comparison, when the switch sends a Trap message, it does not require a
response from the authoritative entity.
In addition, you define a Notify Tag that links an SNMPv3 Notify Table
entry to the host IP address defined in the Configure SNMPv3 Target
Address Table Menu. Lastly, you can configure a storage type for this
table entry which allows you to save the entry to flash memory.
SNMPv3 Target Address Table
The Configure SNMPv3 Target Address Table Menu allows you to
configure the IP address of the host. Also, in an SNMPv3 Target Address
Table entry, you configure the values of the Tag List parameter with the
previously defined Notify Tag parameter values. The Notify Tag
parameter is configured in the Configure SNMPv3 Notify Table. In this
way, the Notify and Target Address tables are linked. Lastly, you can
configure a storage type for this table entry which allows you to save the
entry to flash memory.
SNMPv3 Target Parameters Table
The Configure SNMPv3 Target Parameters Table Menu allows you to
define which user can send messages to the host IP address defined in
the Configure SNMPv3 Target Address Table. The user and its associated
information is previously configured in the Configure SNMPv3 User
Table, SNMPv3 View Table, SNMPv3 Access Table, and SNMPv3
SecurityToGroup Table. Lastly, you can configure a storage type for this
table entry which allows you to save the entry to flash memory.