Allied Telesis AT-S62 - Manual (Page 639)

AT-S62 User’s Guide
Section VIII: Web Browser Management 639
Egress Port(s)
This column lists the source ports whose egress traffic is mirrored
to the destination port.
Status
This column contains the status of the mirroring feature. If
enabled, traffic is being copied to the destination port. If disabled,
no traffic is being mirrored.
4. Click Modify.
The Modify Mirror page is shown in Figure 215.
Figure 215 Modify Mirror Page
5. Click the ports of the port mirror. Clicking a port toggles it through the
possible settings, which are shown here:
The destination (mirror) port. There can be only one
destination port.
A source port. The port’s ingress traffic will be mirrored
to the destination port.
A source port. The port’s egress traffic will be mirrored
to the destination port.
A source port. The port’s ingress and egress traffic will
be mirrored to the destination port.
You can mirror one port, a few ports, or all of the ports on the
switch, with the exception, of course, of the destination port.