Allied Telesis AT-S62 - Manual (Page 44)

Chapter 2: Starting a Local or Telnet Management Session
Section I: Basic Operations 44
To select a menu item, type the corresponding letter or number.
Pressing the Esc key or typing the letter R in a submenu, returns you to
the previous menu.
Enhanced
Stacking
When you start a local management session on a switch that has been
configured as a Master switch, you can manage all the switches in the
enhanced stack from the same management session. This can save you
the time and trouble of having to start a separate local management
session each time you want to manage a switch in your network. It can
also save you from having to go to the different wiring closets where the
switches are located.
For information on enhanced stacking and how to manage different
switches from the same management session, refer to Chapter 3,
Enhanced Stacking on page 48.
Quitting a Local
Session
To quit a local session, return to the Main Menu and type Q for Quit.
You should always exit from a management session when you are
finished managing a switch. This can prevent unauthorized individuals
from making changes to a switch’s configuration should you leave your
management station unattended.
Note
You cannot run both a local management session and a Telnet
management session on the same switch simultaneously. Failure to
properly exit from a local or Telnet management session may block
future management sessions.