Allied Telesis AT-S62 - Manual (Page 656)

Chapter 40: Event Log
Section VIII: Web Browser Management 656
Clearing the Event Log
To clear all events from the log, perform the following procedure:
1. From the Home Page, click Configuration.
The System page is displayed with the General tab selected by
default, as shown in Figure 194 on page 586.
2. From the System page, select the Event Log tab.
The Event Log tab is shown in Figure 219 on page 651.
3. In Log Settings, click Clear Log.
4. Click Apply.
The log, if enabled, will immediately begin to learn new events.