Allied Telesis AT-S62 - Manual (Page 380)

Chapter 19: Multiple Spanning Tree Protocol
Section IV: Spanning Tree Protocols 380
Configuring MSTP Port Settings
To configure a port’s MSTP parameters, perform the following
procedure:
1. From the MSTP Menu, type P to select MSTP Port Parameters.
The MSTP Port Parameters menu is shown in Figure 120.
Figure 120 MSTP Port Parameters Menu
2. Type 1 to select Configure MSTP Port Settings.
The following prompt is displayed:
Enter port-list:
3. Enter the port to configure.
The Configure MSTP Port Settings menu is shown in Figure 121.
Figure 121 Configure MSTP Port Settings Menu
Allied Telesyn Ethernet Switch AT-8524M - AT-S62
Production Switch
User: Manager 11:20:02 02-Jan-2004
MSTP Port Parameters
1 - Configure MSTP Port Settings
2 - Display MSTP Port Configuration
3 - Display MSTP Port State
R - Return to Previous Menu
Enter your selection?
Allied Telesyn Ethernet Switch AT-8524M - AT-S62
Production Switch
User: Manager 11:20:02 02-Jan-2004
Configure MSTP Port Settings
1 - Port Priority ............... 128
2 - Port Internal Path Cost ..... Auto Update
3 - Port External Path Cost ..... 200000
4 - Point-to-Point .............. Auto Detect
5 - Edge Port ................... Yes
C - Check Migration to RSTP on Selected Ports (MCHECK)
R - Return to Previous Menu
Enter your selection?