Allied Telesis AT-S62 - Manual (Page 144)

Chapter 10: Ethernet Statistics
Section I: Basic Operations 144
Clearing Port Counters
To return the statistics counters of a port to zero, perform the following
procedure:
1. From the Main Menu, type 1 to select Port Configuration.
2. From the Port Configuration menu, type 3 to select Port Statistics.
The Port Statistics menu is shown in Figure 40 on page 142.
1. From the Port Statistics menu, type 2 to select Clear Port Statistics.
This prompt is displayed:
Enter port-list:
2. Enter the port whose statistics counters you want to return to zero.
You can specify more than one port at a time.
The port counters are returned to zero.