Allied Telesis AT-S62 - Manual (Page 179)

AT-S62 User’s Guide
Section II: Advanced Operations 179
d. Enter the name of the system file on the switch that you want to
upload to the TFTP server. You can specify only one file. You may
not use wildcards.
The following message is displayed:
Sending the file to Remote TFTP Server - Please
wait ...
Once the switch has uploaded the system file, this message is
displayed:
File sent successfully!
The file is now stored on the TFTP server. You can now
download the file onto another AT-8524M switch in your
network.
7. To upload a file using Xmodem, type X at the prompt displayed in
Step 5.
The following message is displayed:
Local File Name:
8. Enter the name of the system file on the switch that you want to
upload to your computer. You can specify only one file. You can not
use wildcards.
The following prompt is displayed:
You are going to invoke the Xmodem download utility.
Do you wish to continue? [Yes/No]
Note: Please select 1K Xmodem protocol for faster
download.
9. Type Y for Yes.
The following message is displayed:
Use Hyper Terminal's 'Transfer/Receive File' option
to select Protocol
Note: Please select '1K Xmodem' protocol for faster
upload...
10. Begin the file transfer.
Note
The transfer protocol must be Xmodem or 1K Xmodem.
Steps 11 through 14 illustrate how you would upload a file using the
Hilgraeve HyperTerminal program.