Allied Telesis AT-S62 - Manual (Page 550)

Chapter 28: Secure Shell (SSH) Protocol
Section VII: Management Security 550
Displaying SSH Information
To display SSH server information, perform the following procedure:
1. From the Main Menu, type 7 to select Security and Services.
2. From the Security and Services menu, type 5 to select Secure Shell
(SSH).
The Secure Shell (SSH) Menu is shown in Figure 179 on page 548.
3. From the Secure Shell (SSH) menu, select 6 - Show Server information
to display the SSH Server data.
The Show Server Information Menu is shown in Figure 180.
Figure 180 Show Server Information Menu
The following information is displayed:
❑ Versions Supported: Indicates the versions of SSH which are
supported by the AT-S62 software.
❑ Server Status: Indicates whether or not the SSH server is enabled
or disabled.
❑ Server Port: Indicates the well-known port for SSH. The default is
port 22.
Allied Telesyn Ethernet Switch - AT-8524M - AT-S62
Production Switch
User: Manager 11:20:02 02-Jan-2004
Show Server Information Menu
Versions Supported ....... 1.3, 1.5, 2.0
Server Status ............ Enabled
Server Port .............. 22
Host Key ID .............. 200
Host Key Bits ............ 1024
Server Key ID ............ 250
Server Key Bits .......... 768
Server Key Expiry ........ 0 hours
Login Timeout ............ 180 seconds
Authentication Available . Password
Ciphers Available ........ 3DES, 128 bit AES, 192 bit AES,256 bit AES,
Arcfour (RC4)
MACs Available ........... hmac-sha1, hmac-md5
Data Compression ......... Available
R - Return to Previous Menu
Enter your selection?