Allied Telesis AT-S62 - Manual (Page 167)

AT-S62 User’s Guide
Section II: Advanced Operations 167
Downloading an AT-S62 Image File Switch to Switch
The previous section contained the procedure for downloading an
AT-S62 software image onto a switch from a local or Telnet management
session. The procedure in this section explains how to download an
AT-S62 software image from one AT-8524M switch to another AT-8524M
switch.
This procedure is useful in networks that contain a large number of
AT-8524M switches. Once you have updated the software on the master
switch of an enhanced stack, you can instruct the master switch to
automatically upgrade the other AT-8524M switches in the enhanced
stack.
Note
This procedure can be performed from a local or Telnet
management session.
To download a management software image from a master switch to
other switches in the same enhanced stack, perform the following
procedure:
1. From the Main Menu, type 8 to select Enhanced Stacking.
The Enhanced Stacking menu is shown in Figure 5 on page 53.
2. From the Enhanced Stacking menu, type 2 to select Stacking Services.
Note
The “2 - Stacking Services” selection is available only on master
switches.
The Stacking Services menu is shown in Figure 6 on page 54.
3. Type 1 to select Get/Refresh List of Switches. The master switch polls
the network for all enhanced stacking switches in the subnet and
displays the switches in the Stacking Services menu.
4. Type 4 to select Download Image/Bootloader.
The following prompt is displayed:
Enter the list of switches ->
5. Enter the number (Num column in menu) of the AT-8524M switch
whose software you want to update. You can specify more than one
switch at a time.