Allied Telesis AT-S62 - Manual (Page 324)

Chapter 17: SNMPv3 Configuration
Section III: SNMPv3 Operations 324
Displaying the
Display SNMPv3
Notify Table
Menu
This section describes how to display the Display SNMPv3 Notify Table
Menu. For information about the SNMPv3 Notify Table parameters, see
Creating an SNMPv3 Notify Table Entry on page 276.
To display the Display SNMPv3 Notify Table Menu, perform the following
procedure.
1. Follow steps 1 through 3 in the procedure described in Displaying the
Display SNMPv3 User Table Menu on page 319. Or, from the Main
Menu type 5->5->6.
2. From the Display SNMPv3 Table Menu, type 5 to select Display
SNMPv3 Notify Table.
The Display SNMPv3 Notify Table Menu is shown in Figure 92.
Figure 93 Display SNMPv3 Notify Table Menu
Allied Telesyn Ethernet Switch AT-8524M - AT-S62
Production Switch
User: Manager 11:20:02 02-Jan-2004
Display SNMPv3 Notify Table
Notify Name ...................... testengineeringTrap
Notify Tag ....................... testengineeringtag
Notify Type ...................... Inform
Storage Type ..................... NonVolatile
Row Status ....................... Active
N - Next Page
U - Update Display
R - Return to Previous Menu
Enter your selection?