Allied Telesis AT-S62 - Manual (Page 135)

AT-S62 User’s Guide
Section I: Basic Operations 135
Deleting a Port Trunk
Caution
Disconnect the cables from the port trunk on the switch before
performing the following procedure. Deleting a port trunk without
first disconnecting the cables can create loops in your network
topology. Data loops can result in broadcast storms and poor
network performance.
To delete a port trunk from the switch, perform the following procedure:
1. From the Main Menu, type 1 to select Port Menu.
2. From the Port Menu, type 4 to select Port Trunking.
The Port Trunking menu in Figure 35 on page 130 is displayed.
3. Type D to select Delete Trunk.
The following prompt is displayed:
Enter Trunk ID: [1 to 6] ->
4. Enter the ID number of the trunk to be deleted.
A confirmation prompt is displayed.
5. Type Y for yes to delete the port trunk or N for no to cancel this
procedure.
The port trunk is deleted from the switch.
6. After making changes, type R until you return to the Main Menu. Then
type S to select Save Configuration Changes.