beautypg.com

Allied Telesis AT-S62 User Manual

Page 199

background image

AT-S62 User’s Guide

Section II: Advanced Operations

199

Note

The tagged information in a frame is not changed as the frame
traverses the switch. A tagged frame leaves a switch with the same
priority level that it had when it entered.

The default for this parameter is No, meaning that the priority level of
tagged frames is determined by the priority level specified in the
frame itself.

8. Type C to select Configure Port COS Priorities.

A change to a port CoS setting is immediately activated on the port.

9. After making changes, type R until you return to the Main Menu. Then

type S to select Save Configuration Changes.