Allied Telesis AT-S62 - Manual (Page 692)

Chapter 44: SNMPv3 Protocol
Section VIII: Web Browser Management 692
The View Subtree parameter defines a MIB View and the Subtree
Mask further restricts a user’s view, for example, to a specific row
of the MIB tree. The value of the Subnet Mask parameter is
dependent on the subtree you select. See RFC 2575 for detailed
information about defining a subnet mask.
8. In the View Type field, enter one of the following view types:
Included
Enter this value to permit the user to see the subtree specified
above.
Excluded
Enter this value to not permit the user to see the subtree specified
above.
9. In the Storage Type field, enter a storage type for this table entry:
Volatile
Select this storage type if you do not want the ability to save an
entry in the View Table to the configuration file. After making
changes to a View Table entry with a Volatile storage type, Save
Changes does not appear on the General Tab.
NonVolatile
Select this storage type if you want the ability to save an entry in
the View Table to the configuration file. After making changes to
a View Table entry with a NonVolatile storage type, Save Changes
appears on the General Tab.
Note
The Row Status parameter is a read-only field in the Web interface.
The Active value indicates the SNMPv3 View Table entry takes effect
immediately.
10. Click Apply to update the SNMPv3 View Table.
11. To save your changes, return to the General Tab and click Save
Changes.