Allied Telesis AT-S62 - Manual (Page 735)

AT-S62 User’s Guide
Section VIII: Web Browser Management 735
Displaying View
Table Entries
To display entries in the SNMPv3 View Table, perform the following
procedure.
1. From the Home Page, select Monitoring.
The Monitoring System Page is displayed with the General Tab
selected by default, as shown in Figure 195 on page 590.
2. Select the SNMP Tab.
3. From the SNMP Monitoring Tab, click the circle next to View View
Table.
4. Click View at the bottom of the page.
The Monitoring, SNMPv3 View Table Page is shown in Figure 258.
Figure 258 Monitoring, SNMPv3 View Table Page