Allied Telesis AT-S62 - Manual (Page 173)

AT-S62 User’s Guide
Section II: Advanced Operations 173
c. Enter the directory path and file name of the system file on the
TFTP server to be downloaded to the switch. You can specify only
one system file.
The following prompt is displayed:
Local File Name:
d. Enter a name for the system file. This is the name that the switch
will store the file as in its file system.
The following message is displayed:
Getting the file from Remote TFTP Server - Please
wait ...
e. If you have not already, start the TFTP server software.
Once the switch has downloaded the system file, this message
is displayed:
File received successfully!
7. To download a file using Xmodem, type X at the prompt displayed in
Step 5.
The following prompt is displayed:
Local File Name:
8. Enter a name for the system file. This is the name that the switch will
store the file as in its file system.
The following prompt is displayed:
You are going to invoke the Xmodem download utility.
Do you wish to continue? [Yes/No]
Note: Please select 1K Xmodem protocol for faster
download.
9. Type Y for Yes.
The prompt “Downloading” is displayed.
10. Begin the file transfer of the system file using the terminal emulator
program.
Note
The transfer protocol must be Xmodem or 1K Xmodem.
Steps 11 through 14 illustrate how you would download a system file
using the Hilgraeve HyperTerminal program.