Allied Telesis AT-S62 - Manual (Page 78)

Chapter 4: Basic Switch Parameters
Section I: Basic Operations 78
Viewing System Hardware and Software Information
The procedure in this section displays hardware and software
information about the switch. The information includes the switch’s
serial number and MAC address, as well as the status of the power
supply and fan.
To display this information, perform the following procedure:
1. From the Main Menu, type 5 to select System Administration.
The System Administration menu is shown in Figure 7 on page 59.
2. From the System Administration menu, type 1 to select System
Information.
The System Information menu is shown in Figure 13.
Figure 13 System Information Menu
You cannot change the information in this menu.
3. To display system hardware information, type H to select System
Hardware Status.
Allied Telesyn Ethernet Switch AT-8524M - AT-S62
Production Switch
User: Manager 11:20:02 02-Jan-2004
System Information
MAC Address ..... 00:30:84:01:00:00 IP Address ....... 167.11.11.11
Model Name ...... AT-8524M Subnet Mask ...... 255.255.255.0
Serial Number ... S05525A023600000 Gateway .......... 0.0.0.0
System Up Time ... 6D:11H:47M:34S
Bootloader ...... ATS62_LOADER v1.0.0 Build Date ....... Dec 16 2003 15:21:03
Application ..... ATS62 v1.2.0 Build Date ....... Apr 15 2004 17:57:17
System Name ..... Production Switch
Administrator ... John Doe
Location ........ Bldg. 5, Floor 4
H - System Hardware Status
U - Uplink Information
R - Return to Previous Menu
Enter your selection?