Allied Telesis AT-S62 - Manual (Page 759)

AT-S62 User’s Guide
Section VIII: Web Browser Management 759
Point-to-Point
This parameter defines whether the port is functioning as a point-
to-point port. For an explanation of this parameter, refer to Point-
to-Point Ports and Edge Ports on page 336.
Port External Path Cost
The port cost of the port if the port is connected to a bridge which
is a member of another MSTP region or is running STP or RSTP. The
range is 0 to 200,000,000. The default setting is 200,000.
5. After adjusting the parameters, click Apply.
6. Repeat this procedure to configure MSTP parameters for other switch
ports.