Allied Telesis AT-S62 - Manual (Page 736)

Chapter 44: SNMPv3 Protocol
Section VIII: Web Browser Management 736
Displaying
Access Table
Entries
To display entries in the SNMPv3 Access Table, perform the following
procedure.
1. From the Home Page, select Monitoring.
The Monitoring System Page is displayed with the General Tab
selected by default, as shown in Figure 195 on page 590.
2. Select the SNMP Tab.
3. From the SNMP Monitoring Tab, click the circle next to View Access
Table.
4. Click View at the bottom of the page.
The Monitoring, SNMPv3 Access Table Page is shown in Figure
259.
Figure 259 Monitoring, SNMPv3 Access Table Page