Allied Telesis AT-S62 - Manual (Page 633)

AT-S62 User’s Guide
Section VIII: Web Browser Management 633
An example of the Modify Trunk page is shown in Figure 212.
Figure 212 Modify Trunk Page
Note
You cannot change the Trunk ID number or the load distribution
method of a port trunk.
5. To change the name of the trunk, click the Trunk Name field and
modify the name as needed. The name can be up to fifteen
alphanumeric characters. No spaces or special characters, such as
asterisks and exclamation points, are allowed. Each trunk must have a
unique name.
6. To add or remove ports from a trunk, click the ports in the graphical
image of the switch. A selected port changes to white. An unselected
port is black. A port trunk can contain up to eight ports.
7. Click Apply.
Changes to a port trunk are activated on the switch.
8. To permanently save the change, use the Save Changes button in the
General tab. For directions, refer to Saving Your Parameter Changes
on page 577.
9. Reconnect the cables to the ports of the trunk.