Allied Telesis AT-S62 - Manual (Page 739)

AT-S62 User’s Guide
Section VIII: Web Browser Management 739
Displaying
Target Address
Table Entries
To display entries in the SNMPv3 Target Address Table, perform the
following procedure.
1. From the Home Page, select Monitoring.
The Monitoring System Page is displayed with the General Tab
selected by default, as shown in Figure 195 on page 590.
2. Select the SNMP Tab.
3. From the SNMP Monitoring Tab, click the circle next to View Target
Address Table.
4. Click View at the bottom of the page.
The Monitoring, SNMPv3 Target Address Table Page is shown in
Figure 262.
Figure 262 Monitoring, SNMPv3 Target Address Table Page