Allied Telesis AT-S62 - Manual (Page 220)

Chapter 16: Denial of Service Defense
Section II: Advanced Operations 220
A menu is displayed containing either one or two options,
depending on the DoS defense you selected. An example of the
menu is shown in Figure 67.
Figure 67 SYN Flood Configuration Menu
6. Adjust the parameter settings as needed. The parameters are defined
below.
DoS Status
Enables and disables the selected DoS defense on the selected
ports. The default is disabled.
Mirror Port
This option appears for Land, Tear Drop, Ping of Death, and IP
Options. You can use this option to copy offending traffic to
another port on the switch. You can specify only one mirror port.
Specifying a mirror port is not required.
7. Repeat this procedure starting with Step 3 to configure other DoS
defenses.
8. Return to the Main Menu and type S to select Save Configuration
Changes.
Allied Telesyn Ethernet Switch AT-8524M - AT-S62
Production Switch
User: Manager 11:20:02 02-Jan-2004
SYN Flood Configuration
Configuring DoS for Port 2
1 - DoS Status ................. Disabled
R - Return to Previous Menu
Enter your selection?