Allied Telesis AT-S62 - Manual (Page 702)

Chapter 44: SNMPv3 Protocol
Section VIII: Web Browser Management 702
This parameter allows the users assigned to this Group Name to
view the information specified by the View Table entry. This value
does not need to be unique.
7. In the Write View Name field, enter a value that you configured with
the View Name parameter in the View Table.
This parameter allows the users assigned to this Security Group to
write, or modify, the information in the specified View Table. This
value does not need to be unique.
8. In the Notify View Name field, enter a value that you configured with
the View Name parameter in the View Table.
This parameter allows the users assigned to this Group Name to
send traps permitted in the specified View. This value does not
need to be unique.
Note
The Context Match field is a read only field. The Context Match field
is always set to Exact.
9. In the Storage Type field, select one of the following storage types for
this table entry:
Volatile
Select this storage type if you do not want the ability to save an
entry in the Access Table to the configuration file. After making
changes to an Access Table entry with a Volatile storage type,
Save Changes does not appear on the General Tab.
NonVolatile
Select this storage type if you want the ability to save an entry in
the Access Table to the configuration file. After making changes
to an Access Table entry with a NonVolatile storage type, Save
Changes appears on the General Tab.
Note
The Row Status parameter is a read-only field in the Web interface.
The Active value indicates the Access Table entry takes effect
immediately.
10. Click Apply to update the SNMPv3 Access Table.
11. To save your changes, return to the General Tab and click Save
Changes.