Allied Telesis AT-S62 - Manual (Page 532)

Chapter 27: Public Key Infrastructure Certificates
Section VII: Management Security 532
3. Type 2 to select State and specify if a certificate is trusted or
untrusted.
Trusted - This value indicates you have verified that the certificate
is from a trusted CA. This is the default.
Untrusted - This value indicates the certificate is from an
untrusted CA either because you have not verified the CA or you
have verified the CA is untrusted.
4. Type 3 to specify the type assigned to the certificate. There are 3 types
to choose from:
EE - This value indicates the End Entity type. When you specify this
type, the switch tags the certificate to indicate that it belongs to
another end entity. This is the default.
CA - Use this value for a certificate issued by a public or private CA.
Self - Use this value for a self-signed certificate. This type of
certificate is created by the switch itself. The switch treats this type
of certificate as its own.
5. Type 4 to select Modify Certificate.
Your changes are implement in the certificate.
The following message is displayed:
Please wait while certificate is updated...Done.
6. After making changes, type R until you return to the Main Menu. Then
type S to select Save Configuration Changes.