Allied Telesis AT-S62 - Manual (Page 163)

AT-S62 User’s Guide
Section II: Advanced Operations 163
Note
Options 3 and 4 are described in Uploading a System File on page
177.
5. Type 1 to select Download Application Image/Bootloader.
The following prompt is displayed:
Download Method/Protocol [X-Xmodem, T-TFTP]:
6. To download the AT-S62 image file using Xmodem, go to Step 7. To
download the file using TFTP, do the following:
a. Type T.
The following prompt is displayed:
TFTP Server IP address:
b. Enter the IP address of the TFTP server.
The following prompt is displayed:
Remote File Name:
c. Enter the directory path and file name of the AT-S62 image file
stored on the TFTP server.
The following message is displayed:
Getting the file from Remote TFTP Server - Please
wait ...
d. If you have not already done so, start the TFTP server software.
Once the switch has downloaded the image file, this message
is displayed:
File received successfully!
Note
The switch validates the file and then begins the initialization
process of writing the image to flash. The switch will not forward any
network traffic during the initialization process. Once the
management software is initialized, the switch automatically resets.
7. To download a file using Xmodem, type X at the prompt displayed in
Step 5.