Allied Telesis AT-S62 - Manual (Page 737)

AT-S62 User’s Guide
Section VIII: Web Browser Management 737
Displaying
SecurityToGroup
Table Entries
To display entries in the SNMPv3 SecurityToGroup Table, perform the
following procedure.
1. From the Home Page, select Monitoring.
The Monitoring System Page is displayed with the General Tab
selected by default, as shown in Figure 195 on page 590.
2. Select the SNMP Tab.
3. From the SNMP Monitoring Tab, click the circle next to the View
SecurityToGroup Table.
4. Click View at the bottom of the page.
The Monitoring, SNMPv3 SecurityToGroup Table Page is shown in
Figure 260.
Figure 260 Monitoring, SNMPv3 SecurityToGroup Table Page