Allied Telesis AT-S62 - Manual (Page 108)

Chapter 6: Port Parameters
Section I: Basic Operations 108
The Rate Limiting menu is shown in Figure 27.
Figure 27 Rate Limiting Menu
5. Type 4 to select Rate Limit and, when prompted, enter the maximum
number of broadcast, multicast, and unknown unicast ingress
packets you want all switch ports to accept each second. This
threshold is applied independently to each packet type.
6. Type 1, 2, or 3 to activate the threshold for broadcast packets,
multicast packets, and unknown unicast packets, respectively. You
can enable this feature on one, two, or all three packet types.
Rate limiting changes are immediately implemented on all switch
ports.
7. After making changes, type R until you return to the Main Menu. Then
type S to select Save Configuration Changes.
Allied Telesyn Ethernet Switch AT-8524M - AT-S62
Production Switch
User: Manager 11:20:02 02-Jan-2004
Rate Limiting
Configuring Port 1
1 - Broadcast Rate Limiting Status ........... Disabled
2 - Multicast Rate Limiting Status ........... Disabled
3 - Unknown Unicast Rate Limiting Status ..... Disabled
4 - Rate Limit ............................... 262143 packets/second
R - Return to Previous Menu
Enter your selection?