Allied Telesis AT-S62 - Manual (Page 218)

Chapter 16: Denial of Service Defense
Section II: Advanced Operations 218
Enabling or Disabling Denial of Service Prevention
To configure DoS defense, perform the following procedure:
1. From the Main Menu, type 7 to select Security and Services.
The Security and Services menu is shown in Figure 55 on page
196.
2. From the Security and Services menu, type 2 to select Denial of
Service (DoS).
The Denial of Service (DoS) Menu is shown in Figure 65.
Figure 65 Denial of Service (DoS) Menu
3. If you are implementing the SMURF or Land defense, you must
provide the IP address of a node connected to the switch and a
subnet mask. For the Land defense, you must also specify an uplink
port. To do this, complete the following steps. Otherwise, skip ahead
to Step 4.
a. Type 1 to select Lan IP Subnet.
Allied Telesyn Ethernet Switch AT-8524M - AT-S62
Production Switch
User: Manager 11:20:02 02-Jan-2004
DoS Menu
1 - Lan IP Subnet
2 - SYN Flood Configuration
3 - Smurf Configuration
4 - Land Configuration
5 - Teardrop Configuration
6 - Ping Of Death Configuration
7 - IP Option Configuration
R - Return to Previous Menu
Enter your selection?