Allied Telesis AT-S62 - Manual (Page 570)

Chapter 30: Management Access Control List
Section VII: Management Security 570
Adding, Deleting, and Viewing ACEs
You can add or delete an ACE from the Management ACL at any time. To
add an ACE, simply repeat the procedure in Creating the Management
ACL on page 568. The new ACEs that you enter are added to the ACEs
that are already in the Management ACL.
To delete an ACE, you perform the same procedure, but instead of
selecting option 2 - Add Management ACL Entry from the Management
ACL Menu, you select option 3 - Delete Management ACL Entry. The
management software prompts you to enter the specifics of the ACE
that you want to delete.
It can help to first display the contents of the Management ACL and jot
down on paper the IP address, mask, protocol, and Interface information
on the ACE you want to delete. That way you will have the information
when the software prompts you for it.
There is also an option in the Management ACL Menu, Option 4, for
displaying all of the ACEs in the Management ACLs. The option lists the
ACEs along with the specifics of each ACE.