Allied Telesis AT-S62 - Manual (Page 651)

AT-S62 User’s Guide
Section VIII: Web Browser Management 651
Enabling or Disabling the Event Log
Allied Telesyn recommends setting the switch’s date and time if you
intend to use the event log. Otherwise, the switch will not log the entries
with the correct date and time. For instructions, refer to Setting the
System Time on page 67.
To enable or disable the event log, do the following:
1. From the Home Page, select Configuration.
The System page is displayed with the General tab selected by
default, as shown in Figure 194 on page 586.
2. From the System page, select the Event Log tab.
The Event Log tab is shown in Figure 219.
Figure 219 Event Log Tab