Allied Telesis AT-S62 - Manual (Page 112)

Chapter 7: MAC Address Table
Section I: Basic Operations 112
Displaying MAC Addresses
The management software has two menu selections for displaying the
MAC addresses of a switch. One selection displays the static and
dynamic unicast MAC addresses while the other displays the static and
dynamic multicast addresses.
To display the MAC address tables, perform the following procedure:
1. From the Main Menu, type 4 to select MAC Address Tables.
The MAC Address Tables menu is shown in Figure 28.
Figure 28 MAC Address Tables Menu
2. From the MAC Address Tables menu, type 3 to select Display Unicast
MAC Addresses or 4 to select Display Multicast MAC Addresses.
The Display Unicast MAC Addresses menu is shown in Figure 29.
The Display Multicast MAC Addresses menu has the same
selections.
Figure 29 Display Unicast MAC Addresses Menu
Allied Telesyn Ethernet Switch AT-8524M - AT-S62
Production Switch
User: Manager 11:20:02 02-Jan-2004
MAC Address Tables
1 - MAC Address Aging Time ......... 300 second(s)
2 - MAC Addresses Configuration
3 - Display Unicast MAC Addresses
4 - Display Multicast MAC Addresses
R - Return to Previous Menu
Enter your selection?
Allied Telesyn Ethernet Switch AT-8524M - AT-S62
Production Switch
User: Manager 11:20:02 02-Jan-2004
Display Unicast MAC Addresses
1 - Display All
2 - Display Static
3 - Display Dynamic
4 - Display by Port
5 - Display Specified MAC
6 - Display by VLAN ID
7 - Display on Base Ports
R - Return to Previous Menu
Enter your selection?