Allied Telesis AT-S62 - Manual (Page 185)

AT-S62 User’s Guide
Section II: Advanced Operations 185
Displaying Events
To view the event log, do the following:
1. From the Main Menu, type 5 to select System Administration.
2. From the System Administration menu, type 8 to select Event Log.
The Event Log menu is shown in Figure 53 on page 184.
3. Configure options 3 through 7 in the Event Log menu to specify the
types of events you want to view. The options are described below:
3 - Display Output
Selects an event log. This option has only the one selection
Temporary. The event log is located in temporary memory.
4- Display Order
Controls the order of the events in the log. Choices are
Chronological, which displays the events in the order oldest to
newest, and Reverse Chronological, which displays the events
newest to oldest. The default is Chronological.
5 - Display Mode
Controls the format of the event log. Choices are Normal, which
displays the time, module, severity, and description for each
event, and Full, which displays the same information as Normal,
plus filename, line number, and event ID. The default is Normal.
6 - Display Severity
Displays events of a selected severity. Choices are I for
Informational, E for Error, W for Warning, D for Debug, and ALL for
All. The default is informational, error, and warning. You can select
more than one severity at a time (for example, E,W).
7 - Display Module
Displays events of a selected AT-S62 module. For a list of the
modules, refer to Modules on page 187. The default is ALL, which
displays the events for all modules.
4. Once you have set the log filters, type V to select View Log.