Allied Telesis AT-S62 - Manual (Page 77)

AT-S62 User’s Guide
Section I: Basic Operations 77
The following prompt is displayed:
This operation requires a switch reboot. Continue?
[Yes/No] ->
4. Type Y for yes or N to cancel the procedure.
If you respond with yes, the following prompt is displayed:
Do you want to reset serial baud rate to 9600 bps?
[Yes/No] ->
5. Typing Y for yes will change the baud rate of the RS232 Terminal Port
to its default value of 9600 bps. Typing N leaves the baud rate at its
current setting.
The following prompt is displayed:
NOTE: Please save configuration after reboot in
order to make the configuration changes permanent!!!
Waiting for background file operations to complete
.....
Rebooting the Switch .....
The unit has returned to its default settings once the reset process
is complete.
6. Reestablish your management session.
7. From the Main Menu, type S to select Save Configuration Changes.
This step returns the active boot configuration file back to the default
settings.