Allied Telesis AT-S62 - Manual (Page 695)

AT-S62 User’s Guide
Section VIII: Web Browser Management 695
6. In the View Type field, enter one of the following view types:
Included
Enter this value to permit the View Name to see the subtree
specified above.
Excluded
Enter this value to not permit the View Name to see the subtree
specified above.
7. In the Storage Type field, enter a storage type for this table entry:
Volatile
Select this storage type if you do not want the ability to save an
entry in the Target Parameters Table to the configuration file.
After making changes to an Target Parameters Table entry with a
Volatile storage type, Save Changes does not appear on the
General Tab.
NonVolatile
Select this storage type if you want the ability to save an entry in
the View Table to the configuration file. After making changes to
a View Table entry with a NonVolatile storage type, Save Changes
appears on the General Tab.
Note
The Row Status parameter is a read-only field in the web interface.
The Active value indicates the SNMPv3 View Table entry takes effect
immediately.
8. Click Apply to update the SNMPv3 View Table.
9. To save your changes, return to the General Tab and click Save
Changes.