Allied Telesis AT-S62 - Manual (Page 662)

Chapter 41: Quality of Service
Section VIII: Web Browser Management 662
Note
The Configure Egress Weights section in the tab is explained in the
next procedure, Configuring Egress Scheduling on page 663.
4. In the Configure CoS Queues to Egress Queues section of the tab, click
the list for a CoS priority whose queue assignment you want to
change and select the new queue.
For example, to direct all tagged packets with a CoS priority level
of 5 to egress queue Q3, you would use the list in CoS 5 to PQ and
select Q3 - QoS PriorityQ 3.
5. If desired, repeat Step 4 to change the egress queue assignments of
other CoS priorities.
6. Click Apply.
7. To permanently save the change, use the Save Changes button in the
General tab. For directions, refer to Saving Your Parameter Changes
on page 577.