Allied Telesis AT-S62 - Manual (Page 780)

Chapter 47: GARP VLAN Registration Protocol
Section VIII: Web Browser Management 780
Displaying the GVRP Settings
Use this procedure to view the GVRP settings:
1. From the Home page, select Monitoring.
The Monitoring System page is displayed with the General tab
selected by default, as shown in Figure 195 on page 590.
2. From the Monitoring menu, select the Layer 2 option.
3. Select the GVRP tab.
The GVRP tab is shown in Figure 280.
Figure 280 GVRP Tab (Monitoring)
For definitions of the GVRP parameters, refer to Technical
Overview of Generic Attribute Registration Protocol (GARP) on
page 426.
4. To view GVRP switch and port configuration information, select one
of the following and click View:
View Port Configuration
Displays the status of GVRP on each port. Normal indicates that
GVRP is active on a port while None means it is inactive.
View GVRP Database
Refer to Table 21 on page 441 for descriptions of the status
information displayed by the selection.