Allied Telesis AT-S62 - Manual (Page 181)

AT-S62 User’s Guide
Section II: Advanced Operations 181
The System Utilities menu is shown in Figure 9 on page 64.
4. For the System Utilities menu, type 2 to select Downloads and
Uploads.
The Downloads and Uploads menu is shown in Figure 44 on page
162.
5. Type 4 to select Upload a File.
The following prompt is displayed:
Only TFTP uploads are available for a Telnet access
TFTP Server IP address:
6. Enter the IP address of the TFTP server.
The following prompt is displayed:
Remote File Name:
7. Enter a name for the system file. This is the name the file will be stored
as on the TFTP server.
The following message is displayed:
Local File Name:
8. Enter the name of the system file on the switch that you want to
upload to the TFTP server. You can specify only one file. You can not
use wildcards.
The following message is displayed:
Sending the file to Remote TFTP Server - Please wait
...
Once the switch has uploaded the system file, this message is
displayed:
File sent successfully!
The file is now stored on the TFTP server. You can now download the
file onto another AT-8524M switch in your network.