Allied Telesis AT-S62 - Manual (Page 175)

AT-S62 User’s Guide
Section II: Advanced Operations 175
The software immediately begins to download onto the switch. The
Xmodem File Send window in Figure 47 displays current status of the
software download. The download process takes a couple minutes to
complete.
Figure 50 XModem File Send Window
The download is complete when the Downloads and Uploads menu
is displayed.
Downloading a
System File
from a Telnet
Management
Session
To download a system file onto a switch from a Telnet management
session using TFTP, perform the following procedure:
1. Establish a Telnet management session on the switch where you
intend to download the new management software.
2. From the Main Menu, type 5 to select System Administration.
The System Administration menu is shown in Figure 7 on page 59.
3. From the System Administration menu, type 9 to select System
Utilities.
The System Utilities menu is shown in Figure 9 on page 64.
4. For the System Utilities menu, type 2 to select Downloads and
Uploads.
The Downloads and Uploads menu is shown in Figure 44 on page
162.