Allied Telesis AT-S62 - Manual (Page 604)

Chapter 34: SNMPv1 and SNMPv2 Community Strings
Section VIII: Web Browser Management 604
Modifying a Community String
To modify a community string, perform the following procedure:
1. From the Home page, select Configuration.
The System page is displayed with the General tab selected by
default, as shown in Figure 194 on page 586.
2. Select the SNMP tab.
The SNMP tab is shown in Figure 198 on page 599.
3. Click Configure in the SNMPv1/v2c section of the tab
The SNMP tab for SNMPv1 and SNMPv2c is shown in Figure 199
on page 601.
4. Click the button next to the community string you want to modify.
5. Click Modify.
The Modify SNMP Community page is shown in Figure 201.
Figure 201 Modify SNMPv1/v2c Community Page