Allied Telesis AT-S62 - Manual (Page 712)

Chapter 44: SNMPv3 Protocol
Section VIII: Web Browser Management 712
7. In the Storage Type field, select one of the following storage types for
this table entry:
Volatile
Select this storage type if you do not want the ability to save an
entry in the Notify Table to the configuration file. After making
changes to an Notify Table entry with a Volatile storage type, Save
Changes does not appear on the Configuration Tab.
NonVolatile
Select this storage type if you want the ability to save an entry in
the Notify Table to the configuration file. After making changes to
an Notify Table entry with a NonVolatile storage type, Save
Changes appears on the Configuration Tab.
Note
The Row Status parameter is a read-only field in the Web interface.
The Active value indicates the SNMPv3 Notify Table entry takes
effect immediately.
8. Click Apply to update the SNMPv3 Notify Table.
9. To save your changes, return to the General Tab and click Save
Changes.