Allied Telesis AT-S62 - Manual (Page 646)

Chapter 39: File Downloads and Uploads
Section VIII: Web Browser Management 646
switch typically does not have an IP address. Rather, you would
need to perform the download from a local management session
of the switch using Xmodem or, alternatively, switch to switch. For
instructions, refer to Chapter 12, File Downloads and Uploads on
page 160.
To download a file, perform the following procedure:
1. From the Home Page, select Configuration.
The System page is displayed with the General tab selected by
default.
2. Select the System Utilities tab.
The System Utilities tab is shown in Figure 218.
Figure 218 System Utilities Tab
Note
The top portion of the tab is used to return the switch to its factory
default settings. For instructions, refer to Returning the AT-S62
Software to the Factory Default Values on page 596.
3. In the TFTP Server IP Address field, enter the IP address of the network
node that contains the TFTP server software.
4. In the TFTP Operation field, click Download.