Allied Telesis AT-S62 - Manual (Page 649)

AT-S62 User’s Guide
Section VIII: Web Browser Management 649
Note
The top portion of the tab is used to return the switch to its factory
default settings. For instructions, refer to Returning the AT-S62
Software to the Factory Default Values on page 596.
3. In the TFTP Server IP Address field, enter the IP address of the network
node that contains the TFTP server software.
4. In the TFTP Operation field, click Upload.
5. In the TFTP Remote Filename field, enter a name for the file. This is the
name that the file will be stored as on the TFTP server.
6. In the TFTP Local Filename field, enter the name of the file in the
switch’s file system that you want to upload to the TFTP server.
Note
The TFTP File Type options are not used when uploading a file.
7. Click Apply.
The management software notifies you once the upload is
complete.