Allied Telesis AT-S62 - Manual (Page 574)

Chapter 31: Starting a Web Browser Management Session
Section VIII: Web Browser Management 574
Starting a Web Browser Management Session
To establish a web browser management session with an AT-8524M
switch, there must be at least one switch in the subnet with an IP address
and whose stacking status has been changed to master switch. Once
you have started a web browser management session on the master
switch, you can manage all the enhanced stacking switches that reside
in the same enhanced stack.
Note
For background information on enhanced stacking, refer to
Enhanced Stacking Overview on page 49.
To start a web browser management session, perform the following
procedure:
1. Start your web browser.
Note
If your PC with the web browser is connected directly to the switch
to be managed or is on the same side of a firewall as the switch, you
must configure your browser’s network options not to use proxies.
Consult your web browser’s documentation on how to configure
the switch’s web browser not to use proxies.
2. In the URL field of the browser, enter the IP address of the switch you
want to manage or of the master switch of the enhanced stack.
Figure 187 Entering a Switch’s IP Address in the URL Field
Switch’s IP Address