Allied Telesis AT-S62 - Manual (Page 168)

Chapter 12: File Downloads and Uploads
Section II: Advanced Operations 168
Note
You cannot download AT-S62 software onto any other type of
enhanced stacking switch other than AT-8524M switches.
The following prompt is displayed:
Do you want to show remote switch burning flash ->
[Yes/No]
6. You can respond with Yes or No to this prompt. It does not affect the
download.
The following prompt is displayed:
Do you want confirmation before downloading each
switch -> [Yes/No]
7. If you answer Yes to this prompt, the management software prompts
you with a confirmation message before upgrading a switch. If you
answer No, the management software does not display a
confirmation prompt before downloading.
The management software begins the download. The management
software notifies you when the download is complete.
Caution
Once a switch image file has been downloaded, the switch must
decompress it and write it to flash. This can require one to two
minutes to complete. Do not reset or power off the unit while it is
decompressing the file. Once the file has been decompressed, the
switch automatically resets.