Allied Telesis AT-S62 - Manual (Page 671)

AT-S62 User’s Guide
Section VIII: Web Browser Management 671
Displaying a List of Host Nodes and Multicast Routers
You can use the AT-S62 software to display a list of the multicast groups
on a switch, as well as the host nodes. You can also view the multicast
routers. A multicast router is a router that is receiving multicast packets
from a multicast application and transmitting the packets to host nodes.
To view host nodes and multicast routers, perform the following
procedure:
1. From the Home page, select Monitoring.
The Monitoring System page is displayed with the General tab
selected by default, as shown in Figure 195 on page 590.
2. Select the IGMP tab.
The IGMP tab is shown in Figure 228.
Figure 228 IGMP Tab (Monitoring)
For an explanation of the information in this tab, refer to the
previous procedure.
3. To view the multicast addresses and the host nodes, click View
Multicast Host List and then click View. To view the multicast
routers, click View Multicast Router List and then click View.
Viewing a list of host nodes opens a page containing the
following information. The information in the page is for viewing
purposes only.
Multicast Group
The multicast address of the group.