Allied Telesis AT-S62 - Manual (Page 734)

Chapter 44: SNMPv3 Protocol
Section VIII: Web Browser Management 734
Displaying User
Table Entries
To display entries in the SNMPv3 User Table, perform the following
procedure.
1. From the Home Page, select Monitoring.
The Monitoring System Page is displayed with the General Tab
selected by default, as shown in Figure 195 on page 590.
2. Select the SNMP Tab.
3. From the SNMP Monitoring Tab, click the circle next to View User
Table.
4. Click View at the bottom of the page.
The Monitoring, SNMPv3 User Table Page is shown in Figure 257.
Figure 257 Monitoring, SNMPv3 User Table Page