Allied Telesis AT-S62 - Manual (Page 25)

25
Preface
This guide contains instructions on how to configure an AT-8524M Layer
2+ Fast Ethernet Switch using the menu and web browser interfaces of
the AT-S62 management software. For instructions on how to manage
the switch from the command line interface, refer to the AT-S62
Command Line User’s Guide, available from the Allied Telesyn web site.
How This Guide is Organized
This manual is divided into seven sections. The chapters in Sections I to
VI explain how to manage a switch from a local or Telnet management
session using the menu interface. The chapters in Section VII explain
how to manage a switch using the web browser interface. Here is a brief
overview of the sections:
Section I: Basic Operations
The chapters in this section explain how to perform basic operations on
the switch from a local or Telnet management session using the menu
interface. Some of the operations include setting port parameters,
creating port trunks, and viewing the MAC address table.
Section II: Advanced Operations
The chapters in this section explain some of the more advanced
operations of the switch. Examples include using the file system,
downloading and uploading files, and configuring Quality of Service.